Special Butter Hydraulic Nut For Stripe Machine1
3 year ago
The hydraulic nut consists of a nut body, a pressure ring, an oil filling port and an oil discharge and exhaust joint. Clean the appearance of the nut when using it. Screw the nut into the workpiece and lock the nut, the pressure ring should be in the original position, then insert the oil filling hose interface of the hand pump into the oil filling port, lock the unloading switch handle on the right side of the hand pump, slowly pressurize, and drain the oil at the same time The air release cap on the upper part of the exhaust joint is turned inward, and the air is released until the air in the nut is exhausted, HMV Hydraulic Nuts price and clean hydraulic oil flows out. Press out to achieve the purpose of pressing, until the pressure reaches your desired pressing purpose. Loosen the unload switch handle and release the pressurized hose connector of the hand pump.HMV Hydraulic Nuts
|
Features of Hydraulic Nuts
|
|
|
|
1
|
Commonly used in bearings, flywheels, propellers and other workpiece presses hydraulic tools.
|
|
|
2
|
With the resulting top thrust is smooth, no impact, the process does not hurt the workpiece and other characteristics.
|
|
|
3
|
Through the hydraulic nut inner thread, which can be installed in the shaft parts, the piston under the action of 700bar hydraulic pressure to push the workpiece to the installation position.
|
|
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Taizhou Juhuan Lifting Protection Equipment Co., Ltd
- *Message:
-
Submit
Main Product:
Hydraulic Jack,
Hydraulic Wrench,
Hydraulic Pump,
Bearing Heater ,
Hydraulic Puller,
Hydraulic Hole Punching Tool
You May Also Like