gasket maker MPB104

High Temperature Gasket Adhesive Waterproof Acid Gasket Maker

Feature:
This product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. waste oil resistant, good elastic. Color: transparent, black, grey, blue, red.
Main Component:
α, ω-Dyhydroxyl Methyl Silicone

Scope of application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump , plane flange, cover board of other machine equipment.

Using Method:

1、Cleaning up the surface with the cotton fabric, guarantee the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2、In order to obtain good outward appearance, paste the temporary protection adhesive tape near the place to be pasted after clean the surface, pull it out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut the mouth with appropriate angle;
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly to prevent the form of bubble or hole;
5、The sealant forms shape at approximately 10 minutes, and maintain it for reaching the best curing effect under the normal temperature for 24 hours.

Warning:
1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.

2. Do not put within kid’s reach, non-toxic after solidifies completely, avoid contact with eyes before solidification, if eyes contact it carelessly, use massive water to wash, and go to see a doctor.

3. When operation, must hold the glue steadily to prevent forming bubbles to get  the best seal effect.
4. After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5. This product should be operated at temperature 5-40℃，relative humidity 40-80%
Storage and packing:
1. This product is non-flammable, seal it and store at 10-27℃ cool and dry place, term of validity for top grade, medium grade, is 12 months, 9 months respectively.

2. Packing：85g / pcs packed with tube.