Motorcycle accessories LED turn signal
2 year agoThe flashing frequency of the turn signal lamps of motorcycle vehicle accessories shall be on/off for an equal time. If the flashing frequency of the thermal resistance flasher is too high, it must be adjusted. The method is as follows: bend the resistance wire bracket downward with pointed nose pliers to reduce the gap between the suction piece and the magnet. The larger the gap between the suction piece and the magnet, the higher the flash frequency; On the contrary, the flash frequency is lower. During adjustment, it shall be adjusted and tested until the flash frequency reaches the standard requirements. For capacitive and transistor scintillators, if they are damaged in use, they cannot be adjusted. If they are abnormal, they should be replaced with new components. Check the buzzer. When the motorcycle steering switch is toggled, the steering lamp will light up but the buzzer will not sound. Check the contact clearance of the buzzer. If it is incorrect, remove the buzzer, polish the contact with fine sandpaper, and then turn the steering lamp switch to adjust the contact clearance until the sound of the buzzer is normal.
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Chongqing Haike Thermal Insulation Material Co., Ltd.
- *Message:
-
Submit
Main Product:
Motorcycle Shock Absorber,
Motorcycle Engine Accessories,
Motorcycle Brake Accessories,
Motorcycle Throttle Accessories,
Motorcycle Vehicle Accessories,
Motorcycle Other Accessories
You May Also Like