KOBELCO Middle Arm Cylinder Seal Kit02
3 year ago
Repair and packaging steps for Shensteel middle arm oil seal:
1. To check whether there are impurities such as dust and sand on the surface and lip of the oil seal, avoid these substances damaging the lip and shaft during shaft movement, and cause leakage.
2. Fill the lip of the middle arm oil seal with lubricating grease.
3. Confirm that there are no foreign objects such as rust resistant oil or dust attached to the surface of the shaft and cavity
4. Confirm that there are no burrs on the surface of the shaft cavity, chamfer, etc. to avoid damaging the lip during installation.
5. When assembling into the cavity, it is important to note that the installation direction of the oil seal is to face the sealing lip towards the side where the seal is introduced.
6. When installing the middle arm oil seal, please use a special fixture to avoid tilting the oil seal.
KOBELCO Boom Cylinder Seal Kit
Seal Repair kit
| KOBELCO Supported Models | |||
|
|
|||
| SK330-6E--SK75-8 | |||
| SK230-6E--SK200-8 | |||
| SK200-5/6--SK60-1/3 | |||
| SK200-8--SK60-5 | |||
| SK120-6--SK100-3 | |||
| SK200-6E--SK100-5 | |||
| SK120-5--SK120-3 | |||
|
SK130-8/140-8 |
|||
|
SK350-8/330-8 |
|||
|
SK250/260-8 |
|||
|
SK200-1/3N |
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
|
|
|||
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Safe Seal Technology Co., Ltd.
- *Message:
-
Submit
Main Product:
Excavator cylinder oil seals,
Hammer seals for breaking rock,
Seal repair kit ,
Hydraulic support seal,
Polyurethane Photovoltaic Equipment,
Polyurethane wind energy equipment
You May Also Like