Portable Steam Shrink Machine

Title goes here.
This machine has the advantages of strong reliability, simple operation and use, environmental protection and energy saving.

*-1)This steam controller contains:
*-A set of variable resistance regulators
*-A set of anti-overheating protection switches
*-A set of heaters (220V 2.5KW)
*One water pump (220V)
*A button switch (220V 10A)

*-2) Equipment start and stop control
● Press the "Power" button
to turn on the controller, the water inlet electromagnetic pump will start, and 100°C steam will be ejected immediately after the
steam generator enters the water.
● When the water level is too low, the pump cannot pump water, please add water in time to avoid damage to the machine due to dry
burning.

*-3) Protection function
The heater has anti-dry burning function. When the temperature rises to the protection temperature, the anti-dry burning component
is disconnected (which can be restored later). At this time,please add water immediately to avoid dry burning damage to the
machine.

*-4) Switch on and off
The controller can be turned on or off by the run/stop button on the controller panel.To
Five, operation steps
1. Turn on the power switch; it takes 3-4 minutes for the cold machine to start, and the temperature in the box can reach 100°C.
2. Open the drawer (the drawer should be fully open to close
the inner door to prevent the steam from coming out of the box). Be careful not to be scalded by the steam coming out of the
drawer.
3. Put the lunch box with the protective film in the box, close the drawer for 2-3 seconds, open the drawer (same as 2) and take
out the packed lunch box.