CPD20

CPD20-B
特性Characteristics			单位unit
型号	Model	CPD20-B
驾驶方式	driving mode	座驾式 seated
额定起重量	rated capacity	2000	kg
载荷中心距	load center distance	500	mm
动力方式	power mode	铅酸蓄电池 lead-acid battery
轴距	wheelbase	1430	mm
轮胎Tyre
轮胎类型	tyre type	实心胎
车轮数量（前/后）	wheels number(front/rear)	2/2
前轮距	front track	920	mm
后轮距	rear track	898	mm
轮胎,前	tyre(front)	18x7-10
轮胎,后	tyre(rear)	16x6-8
尺寸Size
前悬距	front overhang	325	mm
门架倾角,前/后	tilt of the mast,front/rear	5/10	°
门架缩回时高度	height,mast retraction	2030	mm
自由起升高度	free lift height	/	mm
最大起升高度	overall maximum lift height	3000	mm
门架伸出时高度	height,mast extended	4055	mm
护顶架高度	overhead guard height	2110	mm
货叉调节范围（外侧）最大、最小	lateral Fork Adjustment(Outside of Forks)Max/Min	1040/100	mm
货叉尺寸 厚x宽x长                            fork size(LxWxT)		35*100*920	mm
车体长度 (不含货叉）	truck body length(fork excluded)	2063	mm
车体宽度	truck body width	1096	mm
转弯半径	turning radius	2070	mm
门架离地间隙	groubd clearance under mast	88	mm
轴距中心离地间隙（满载）	Ground clearance at center of wheelbase(laden)	110	mm
直角堆垛通道宽度(托盘1000x1000mm,间隙200mm)	width of aisle right-angle stacking(pallet1000x1000mm clearance 200mm)	3655	mm
直角堆垛通道宽度(托盘1200x1200mm,间隙200mm)	width of aisle right-angle stacking(pallet1200x1200mm clearance 200mm)	3855	mm
性能 Performance
行驶速度，满/空载	travel speed,laden/unladen	6/7	km/h
起升速度，满/空载	lifting speed,laden/unladen	120/230	mm/s
下降速度，满/空载	lowering speed,laden/unladen	450	mm/s
最大爬坡度，满/空载	maximum negoniable gradient,laden/unladen	15/20	%
重量 Weight
自重（包含蓄电池）	service mass(with battery)	2710	kg
桥负荷：空载，前/后	axle load:unloaded,front/rear		kg
桥负荷：满载，前/后	axle load:loaded,front/rear		kg
蓄电池电压/容量	battery voltage /nominal capacity	60V/180Ah	V/Ah
蓄电池	battery weight	280	kg
电气配置
驱动电机功率-60分钟	drive motor power-60 minutes	5	kW
起升电机功率-15分钟	lift motor  power-15 minutes	3	kW
驱动电机控制方式	drive motor controlling mode	MOSFET/AC
起升电机控制方式	lifting motor controlling mode	MOSFET/AC
行车制动/停车制动	service brake/parking brake	Hydraulic/Mechanial
液压系统工作压力	hydraulic system working pressure	17.5	Mpa

◆Air suction system

The air suction port is installed above the pillar of the overhead guard to keep away the dust generated by the wheels, and the engine sucks in clean air, thereby reducing noise.
◆Wide view door frame
αH series forklifts are equipped with a wide view mast, which enables the operator to see the front better.
◆Strict environmental protection design
The built-in heat-insulating and sound-absorbing materials in the car body and the filling and sealing of the rubber parts at the joint gap between the engine hood and the car body all well absorb vibration and reduce noise.
◆Reliable dedicated instrument
The small instrument panel and the steering column are connected together, this kind of structure is more reasonable and the vision is better.
This instrument panel has a fuel gauge and other warning lights, so that the working conditions can be controlled in a timely and accurate manner.
technical parameter: