Straw hot melt adhesive

                    How to use straw hot melt adhesive?

First of all, cut the nozzle of the binding agent, and then insert it in the glue gun, and turn on the switch button of the glue gun to normally align the use of the part. Or use a lighter to heat the hot melt adhesive, and then apply it in the position where it needs to be used, be sure to apply it evenly, and then glue it.

Hot melt adhesive for plastic straw

1. must understand and master the various forms of hot melt adhesive and technical performance (including technical parameters).
The opening time and curing time of hot melt adhesives are also different, especially the use time of summer adhesives and winter adhesives is strictly distinguished, and the opening and curing time are different with different temperatures.
2. when using hot melt adhesive, do not directly heat with fire. Must be melted with spacer oil heating, or with a sealed electric heating plate heating.
3. before the use of solid hot melt adhesive, please use the preheating device to preheat qualified, discharged into the adhesive coated work box for use. The preheating time is usually about 2 hours.

When using rubber, please do not directly match solid rubber blocks (that is, unpreheated rubber) in the rubber shell of the rubber coating operation to prevent poor rheology of the colloid or not completely melted the colloid on the product, resulting in uneven gluing and affecting the quality.

4, the heating glue pot in the closing force to grasp moderate, adding too much colloidal solution in turn melting, will make its deterioration and aging, viscosity reduction, harm the adhesion.
5, in the hot melt adhesive opening time, to complete the entire bonding process.
6. When repairing adhesive equipment for a long time, the preheating glue and working glue pot should be closed to prevent the aging of the adhesive.
7. The temperature of molten colloid should be strictly controlled within the temperature range of use.
8, to remove the heating glue pot and the glue box in the work on time, maintain the cleaning of the glue pot, avoid the settling of the residue in the adhesive and harm the accuracy of the temperature control, and even lead to the failure of the temperature controller resulting in the ignition of the colloidal solution. In general, under all normal production and manufacturing operation conditions, the heating glue pot should be removed once a month; The glue box (for dispensing) should be cleaned once every half month. Cleaning glue pot to set up a system for easy implementation.