32 meter wide aerial work vehicle

This 33 Meters High Altitude Work Vehicle is made of new high-strength ultra-thin steel, with a lightweight design and a total weight of about 5 tons, with a length of less than 6 meters

This blue license high-altitude work truck can be driven with C1 license, and operators can drive it on their own; The overall dimensions of the vehicle are 5998 * 2000 * 3100mm, which can be used in urban areas. Made in our factory 33 Meters High Altitude Work truck It has a compact body, flexible driving, and is easy to operate.

This 31 meter aerial work vehicles is made of new high-strength ultra-thin steel, with a lightweight design and a total weight of about 5 tons, with a length of less than 6 meters，Low fuel consumption is another advantage of this Jiangling 31 meter overhead working truck

According to a report from the Automobile Association, for every 10% reduction in vehicle weight, fuel efficiency can be improved by 6% -8%, and fuel consumption can be reduced by 7%; For every 100kg reduction in vehicle weight, the fuel consumption per 100 kilometers can be reduced by 0.3 L to 0.6 L. This vehicle is more efficient than transmission
The traditional model is 40% lighter, with a fuel consumption reduction of 1.2 L to 2.4 L per 100 kilometers, and improved fuel efficiency;
Secondly, this high-altitude work vehicle has a wide operating range and good stability. The vertical operating height of this Jiangling 31 meter high-altitude work vehicle is 31 meters, and the turntable rotates 360 degrees. The action is simple, easy to operate, and the execution of the action is fast. The horizontal operation distance can reach 20M backwards

The 33 meter high-altitude work platform produced by our factory can be operated by electronic control or remote wireless remote control, both of which can be remotely operated
Motivation point, engine shutdown, remote control of throttle size; Automatic acceleration of the leg accelerator; Rotary table ± 360 ° unlimited angle rotation operation, wireless remote control technology, operators can work in narrow working environments, flexible and convenient operation, no blind spots, better work vision, and avoid operators in cold and hot weather, can choose suitable locations to complete operations; One hand can complete all compound movements.
During the product development process, methods such as structural safety verification, stability analysis, and reliability verification are adopted to ensure the stable and reliable performance of the product within the scope of operation; Before leaving the factory, in addition to the rated load test, a dynamic load test with a factor of 1.25 and a static load test with a factor of 1.5 have also been carried out to ensure the safe and stable operation of the product under a