c16 inch open mill
2 year ago
Product details
New 16 inch single frequency conversion speed control water-cooled mixer
Product application: Used in the production of chemical raw materials, rubber, silicone, and other materials, as well as in polymer blending, mixing pigments, stabilizers, stabilizers, and other mixing, color matching, mixing of raw rubber and compounding agents, or for hot mixing of rubber materials and compression of rubber materials
Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd. was founded in 1988 in Dongguan, Guangdong. Its main products Small open mill, Small internal mixer, Small tablet press, small vulcanization machine, Small extruder, and various customized laboratory mixer rubber and plastic mechanical equipment. Established the Taiwan Joint Venture Business License in 2009, after more than 30 years of research and development and creation. It has been located in Houjie Town, Dongguan City, Chinese Mainland Province, mainland China.
The position of the directional sleeve opening determines the position where the abrasive is fed to the blade by the shot splitter. The shape of the opening on the directional sleeve will affect the divergent shape of the abrasive and the size of the hot zone. The so-called hot zone refers to an area where abrasive is relatively concentrated on the divergent surface of the abrasive, which is caused by uneven distribution of abrasive on the blade. The positioning of the adjustable directional sleeve can be adjusted appropriately based on the wear of the opening, ensuring that the throwing head operates in good working condition. The blades in the polishing head are in direct contact with the abrasive, and their quality is closely related to the performance of the polishing head.
The wear resistance of the blades directly determines the lifespan of the blades and the operating cost of the shot blasting machine. Therefore, the blades of the polishing head must be made of high wear resistant materials. The wear resistance of blades is not only related to the material of the blades, but also closely related to the working conditions of the shot blasting machine. For example, if there is 1% sand in the abrasive, the lifespan of the blades will be shortened by 80%. Some people say that the lifespan of the separation device determines the lifespan of the shot blasting machine, which is not an exaggeration.
Blade wear or cracking can cause vibration when the impeller rotates at high speed. Therefore, it is necessary to regularly check the integrity of the blades and replace any problematic blades in a timely manner. In order to ensure the stability of the throwing head operation, blade replacement must be carried out in pairs, that is, the blades opposite the unqualified blades must be replaced simultaneously to obtain good dynamic balance. If it is suspected that the blade issue is causing the throwing head to work improperly, all blades need to be replaced.
The casting defects of the blades will inevitably accelerate the wear of the blades, and the situation is even more severe when using chilled cast iron pellets as abrasives. After analyzing the worn blades, it is believed that blades with casting defects can cause abrasive particles to bounce during movement. The bouncing abrasive particles in turn cause erosion on the blades, thereby exacerbating their wear. If there is sand in the abrasive, it will exacerbate the wear of the blades.
Product application: Used in the production of chemical raw materials, rubber, silicone, and other materials, as well as in polymer blending, mixing pigments, stabilizers, stabilizers, and other mixing, color matching, mixing of raw rubber and compounding agents, or for hot mixing of rubber materials and compression of rubber materials
Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd. was founded in 1988 in Dongguan, Guangdong. Its main products Small open mill, Small internal mixer, Small tablet press, small vulcanization machine, Small extruder, and various customized laboratory mixer rubber and plastic mechanical equipment. Established the Taiwan Joint Venture Business License in 2009, after more than 30 years of research and development and creation. It has been located in Houjie Town, Dongguan City, Chinese Mainland Province, mainland China.
The position of the directional sleeve opening determines the position where the abrasive is fed to the blade by the shot splitter. The shape of the opening on the directional sleeve will affect the divergent shape of the abrasive and the size of the hot zone. The so-called hot zone refers to an area where abrasive is relatively concentrated on the divergent surface of the abrasive, which is caused by uneven distribution of abrasive on the blade. The positioning of the adjustable directional sleeve can be adjusted appropriately based on the wear of the opening, ensuring that the throwing head operates in good working condition. The blades in the polishing head are in direct contact with the abrasive, and their quality is closely related to the performance of the polishing head.
The wear resistance of the blades directly determines the lifespan of the blades and the operating cost of the shot blasting machine. Therefore, the blades of the polishing head must be made of high wear resistant materials. The wear resistance of blades is not only related to the material of the blades, but also closely related to the working conditions of the shot blasting machine. For example, if there is 1% sand in the abrasive, the lifespan of the blades will be shortened by 80%. Some people say that the lifespan of the separation device determines the lifespan of the shot blasting machine, which is not an exaggeration.
Blade wear or cracking can cause vibration when the impeller rotates at high speed. Therefore, it is necessary to regularly check the integrity of the blades and replace any problematic blades in a timely manner. In order to ensure the stability of the throwing head operation, blade replacement must be carried out in pairs, that is, the blades opposite the unqualified blades must be replaced simultaneously to obtain good dynamic balance. If it is suspected that the blade issue is causing the throwing head to work improperly, all blades need to be replaced.
The casting defects of the blades will inevitably accelerate the wear of the blades, and the situation is even more severe when using chilled cast iron pellets as abrasives. After analyzing the worn blades, it is believed that blades with casting defects can cause abrasive particles to bounce during movement. The bouncing abrasive particles in turn cause erosion on the blades, thereby exacerbating their wear. If there is sand in the abrasive, it will exacerbate the wear of the blades.
Similar Video Recommendation
<
>
You May Also Like
Bossgoovideo.com Contact Now
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd
- *Message:
-
Submit
Disclaimer :
The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from
transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation.
If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Suppliers
Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd
Audited supplier
2 year
Main Product:
Small Mixer,
Small Open Mill,
Small Vulcanizing Machine,
Small Extruder,
Laboratory Mixer ,
Experimental Mixer
You May Also Like