e16 inch open mill
2 year ago
Product details
New 16 inch small open mixer, automatic rubber flipping machine, single frequency variable speed silicone water-cooled rubber flipping machine
ZG-400LD Double Roller Open Mill 16 inch Single Speed Control Water Cooled Open Mill (with a complete set of automatic rubber flipper device)
Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd. was founded in 1988 in Dongguan, Guangdong. Its main products Small open mill, Small internal mixer, Small tablet press, small vulcanization machine, Small extruder, and various customized laboratory mixer rubber and plastic mechanical equipment. Established the Taiwan Joint Venture Business License in 2009, after more than 30 years of research and development and creation. It has been located in Houjie Town, Dongguan City, Chinese Mainland Province, mainland China.
Before driving, leather wrist protectors must be worn, and masks must be worn during mixing operations. Waist ties, straps, rubber, etc. must be avoided, and dressing operations are strictly prohibited. Carefully check for any debris between the gears and rollers. When driving for the first time in each shift, the emergency braking device must be pulled to check whether the braking is sensitive and reliable (after the empty car brakes, the front roller should not rotate more than a quarter of a turn). It is strictly prohibited to use the emergency braking device to shut down the car during normal operation. When two or more people operate together, they must respond to each other and confirm that there is no danger before driving.
Correct operation
Firstly, adjust the roll spacing to maintain a balance between the rolls. If the adjustment of the roller spacing at both ends is not the same, it will cause the roller to be overloaded and easily damage the equipment, which is strictly prohibited. It is customary to add materials from the power input end, but this is actually unreasonable. From the bending moment diagram and torque diagram, the feeding should be at the gear end of the speed ratio. Due to the fact that the combined bending moment and torque at the transmission end are greater than those at the gear ratio end, adding a hard large piece of adhesive at the transmission end is more likely to damage the equipment.
During the operation of the roller, the hot roller suddenly cools down, that is, when the temperature of the roller is found to be too high, cooling water is suddenly introduced. Under the combined effect of transverse pressure and temperature difference stress, the roller can be damaged. Therefore, cooling should be gradually carried out, preferably with an empty car.
When debris or accumulated glue is found in the rubber material or roller during the operation of the roller, the machine must be stopped for processing. If there is adhesive accumulation or malfunction on the transportation belt, it must also be stopped for handling. If encountering a sudden stop, the power should be cut off in sequence and the water and steam valves should be closed. It is strictly prohibited to drive with load. Prohibit leaning or standing on the rotating parts of the equipment and material trays; Do not transport objects above the operating roller; When pulling and pushing vehicles, pay attention to the surrounding conditions to prevent collisions and collisions with people, and prevent overloading and injury to people.
ZG-400LD Double Roller Open Mill 16 inch Single Speed Control Water Cooled Open Mill (with a complete set of automatic rubber flipper device)
Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd. was founded in 1988 in Dongguan, Guangdong. Its main products Small open mill, Small internal mixer, Small tablet press, small vulcanization machine, Small extruder, and various customized laboratory mixer rubber and plastic mechanical equipment. Established the Taiwan Joint Venture Business License in 2009, after more than 30 years of research and development and creation. It has been located in Houjie Town, Dongguan City, Chinese Mainland Province, mainland China.
Before driving, leather wrist protectors must be worn, and masks must be worn during mixing operations. Waist ties, straps, rubber, etc. must be avoided, and dressing operations are strictly prohibited. Carefully check for any debris between the gears and rollers. When driving for the first time in each shift, the emergency braking device must be pulled to check whether the braking is sensitive and reliable (after the empty car brakes, the front roller should not rotate more than a quarter of a turn). It is strictly prohibited to use the emergency braking device to shut down the car during normal operation. When two or more people operate together, they must respond to each other and confirm that there is no danger before driving.
Correct operation
Firstly, adjust the roll spacing to maintain a balance between the rolls. If the adjustment of the roller spacing at both ends is not the same, it will cause the roller to be overloaded and easily damage the equipment, which is strictly prohibited. It is customary to add materials from the power input end, but this is actually unreasonable. From the bending moment diagram and torque diagram, the feeding should be at the gear end of the speed ratio. Due to the fact that the combined bending moment and torque at the transmission end are greater than those at the gear ratio end, adding a hard large piece of adhesive at the transmission end is more likely to damage the equipment.
During the operation of the roller, the hot roller suddenly cools down, that is, when the temperature of the roller is found to be too high, cooling water is suddenly introduced. Under the combined effect of transverse pressure and temperature difference stress, the roller can be damaged. Therefore, cooling should be gradually carried out, preferably with an empty car.
When debris or accumulated glue is found in the rubber material or roller during the operation of the roller, the machine must be stopped for processing. If there is adhesive accumulation or malfunction on the transportation belt, it must also be stopped for handling. If encountering a sudden stop, the power should be cut off in sequence and the water and steam valves should be closed. It is strictly prohibited to drive with load. Prohibit leaning or standing on the rotating parts of the equipment and material trays; Do not transport objects above the operating roller; When pulling and pushing vehicles, pay attention to the surrounding conditions to prevent collisions and collisions with people, and prevent overloading and injury to people.
Similar Video Recommendation
<
>
You May Also Like
Bossgoovideo.com Contact Now
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd
- *Message:
-
Submit
Disclaimer :
The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from
transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation.
If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Suppliers
Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd
Audited supplier
2 year
Main Product:
Small Mixer ,
Small Open Mill,
Small Vulcanizing Machine,
Small Extruder,
Laboratory Mixer,
Experimental Mixer
You May Also Like