injection moulding machine parts
12 month ago
2. Clamping unit: The clamping unit holds the mould in place and applies pressure to keep it closed during the injection process.
3. Mould: The mould is the tool that shapes the raw material into the desired product. It consists of two halves, the cavity and the core, which are held together by the clamping unit.
4. Heating and cooling system: This system is used to control the temperature of the mould and the raw material, ensuring proper melting and solidification of the material.
5. Hydraulic system: The hydraulic system provides the power to operate the clamping unit and the injection unit.
6. Control panel: The control panel is used to set and monitor the various parameters of the injection moulding process, such as temperature, pressure, and cycle time.
7. Ejector system: The ejector system is used to remove the finished product from the mould once it has solidified.
8. Hopper: The hopper is the container that holds the raw material and feeds it into the injection unit.
9. Screw and barrel: The screw and barrel are part of the injection unit and are responsible for melting and mixing the raw material before it is injected into the mould.
10. Safety guards: Safety guards are installed to protect operators from moving parts and hot surfaces during the operation of the injection moulding machine.
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Ningbo Hengnuo Hydraulic Drive Co.,Ltd
- *Message:
-
Submit
Main Product:
hydraulic motor,
gear box,
hydraulic pump,
hydraulic valve ,
hydraulic winch,
hydraulic system
You May Also Like