automatic inspection

Lighters Flame Inspection Machine Precautions
1. Operate according to the order requirements in combination with the inspection methods provided by the quality department.
2. Pick up the integrated fire and check if it exists before firing.
     Less air, air leakage and no air and pick out defective products with defects in appearance.
3. Set the inspection machine to the standard flame height according to the order requirements.
     Operate in accordance with the normal requirements for three consecutive fires or three consecutive fires
     Two inferior (specifically based on customer needs).

Fully automatic inspection machine for lighters-the equipment loading and unloading are all automatically loaded and unloaded by a manipulator. The intelligent system can automatically fine-tune the fire ring according to the process requirements to reach the required flame size, and automatically pick out the defective products to ensure that the inspection is good Qualified products will not have defective products, ensuring long-term quality assurance.

Material: stainless steel + aluminum
Product size: 2.35m*1.2m*1.55m
Voltage: AC220v
Air pressure: 0.6mp
Power: 2750w
Weight: 350kg
Device model: FT-JY-10
Output: 8000-10000
Operating staff: 1

Process Description
1. Match the fixture according to the model.
2. Debug the machine according to customer needs and quality requirements (flame height, ignition rate).
3. After 200 pieces of experimental equipment are produced, 100 pieces shall be self-inspected, and then 100 pieces shall be sent to quality inspection before mass production.