Multifunctional water pump control valve

    A multifunctional water pump control valve is a valve that integrates multiple functions such as gate valve, check valve, ball valve and water hammer eliminator. It is mainly used on the outlet pipeline of water pumps to prevent water hammer and water hammer phenomena, and ensure the stability and safety of the water supply system. It can automatically adjust the flow rate when the water pump starts and stops, avoiding pressure fluctuations caused by the start and stop of the water pump and impacting the pipeline network. It mainly used on the outlet pipeline of water pumps to achieve various operations such as slow opening, full opening, fast closing, and slow closing of water pumps. It aims to prevent water hammer and water hammer phenomena, ensure the safety and reliability of the water supply system.

working principle
    The core of the multifunctional water pump control valves lies in its unique dual chamber control structure, which utilizes the coordinated work of the main valve and regulating valve to achieve precise control of the outlet flow rate of the water pump through water pressure. When the water pump starts, the main valve gradually opens, and when the water pump stops working, the main valve quickly closes most of its opening, and then smoothly closes the valve through slow pressure reduction in the control room to eliminate the water hammer effect

Installation and debugging
    When installing the multifunctional water pump control valve, it is necessary to ensure that the main valve is intact, all fasteners are secure, and all accessories are complete. The installation position should be correct, the valve should be placed horizontally, and the valve arrow should point in the same direction as the water flow. During the debugging phase, the opening and closing speed of the main valve can be adjusted by adjusting the valve to ensure that the valve can accurately respond to the operating requirements of the water pump. If it is found that the main valve cannot be opened and closed normally, check whether the control pipe is connected properly and whether the valve on the control pipe has been opened.