Plug Pin Bending Testing Instrument

                           Plug Pin Bending Testing Instrument

                         YW-3145

Compliance Standards: 

AS3112-1-2023, Clause 2.13.7.2, Figure 2.8

Application: 

Testing the bending performance of flat pins on plugs rated up to and including 15A.

Technical Principle: 

The pressure device should be placed on a stable platform, and the level of the equipment is maintained by adjusting the support feet (level gauge provided by the customer).

The equipment uses a five-point manual fixture to secure the tested plug, and the bending life test of the pins is conducted through automatic pressurization by the electric cylinder.

Technical Parameters:

1. Distance from the pressure point to the end surface of the plug in the horizontal direction: 14±0.5 mm

2. Downward pressing height of the pin on the tested plug in the vertical direction: 7.5±0.3 mm

3. Maximum pressure of the device: 1000 N

4. Maximum stroke of the device: 12±3 mm

5. Maximum speed of the press head: 12 mm/s

6. Time required for a single cycle: <10s

7. Interval time between continuous cycles: >10s

8. Number of continuous automatic cycles: 20 times