xsg (49)

Spin Flash Drying Machine

Spin Flash Drying Equipment Features:

☆ Spin Flash Drying Equipment is ideal dryer for pasty filter cake

☆ Spin Flash Drying Machinery , Wet material is dispersed into a stream of heated air (or gas) which conveys it through a drying duct. Using the heat from the airstream, the material dries as it is conveyed. Product is separated using cyclones, and/or bag filters. Typically, cyclones are followed by scrubbers or bag filters for final cleaning of the exhaust gases to meet current emission requirements.

☆ Spin Flash Dryer Equipment is big capacity drying machine

☆ Spin Flash Dryer Machine is making up pasty filter cake directly into dry powder

Spin Flash Drier Equipment

The hot air enters into the bottom of the drier in tangent direction. Under the driving of the stirrer, a powerful rotating wind field is formed. The paste state materials enter into the drier through the screw charger. The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried. The dried materials after the de-watering will go up with the heat-air flow. The step rings will stop and keep the big particles. Small particles will be discharged out of the drier from the of the equipment by centrifugal force function and be smashed again after they fall down to the bottom.

Spin Flash Drier Machine Description:

This machine combines the whirl technology with the fluidity. Ejection and smashing step technologies. The equipment is compact and small in size, high in production efficiency and continuous in the production. It has realized that a small equipment can perform the large production. The drying capacity for this machine is big but its energy consumption is low. Its hear efficiency can go up to more than 70%. The material star time is very short. The quality of the final products is very good, The machine can be used for drying the heat sensitive materials. For the negative pressure or the micro-negative pressure operation, the machine is good for its tightness and high in the efficiency so as to eliminate the environmental Pollution.

Optional Choices
For the main electrical components , we have international brand choices such as ABB , Siemens or Schneider or others.
For the material for the machine , we have choices onAISISUS304 , AISISUS316L,carbon steel and so on .
For the control system , we have choices on push button, PLC+HMI and so on .
We can design the explosion-proof system for our spray dryer based on the customer request.
For the fitting system for the spray dryer, we can supply it. such as feeding system , pneumatic conveying system and so on .
For the heating system for the machine , it is very flexible. we can configure it based on the customer site conditions ,such as steam ,electricity , gas furnace and so on , all of them we can design it to match our spray dryer.
If without heating system , it can as a cooler to make particle with cooling air.

Main Technical Parameter: