Professional Manufacturer Custom Aluminum Extrusion Heatsinks1

The aluminum extruded profile heat sink structure for LED lamps mainly includes sealing glass, double-sided sealing tape, sealing tape, aluminum substrate and fins; The aluminum substrate, fin and sealing belt are made into one; The double-sided sealing tape is paved on the radiator sealing tape, and then the reinforced sealing glass is placed on the double-sided sealing tape for compaction. At least 20 fins are evenly distributed on the aluminum substrate. The thickness of the aluminum substrate c is 6-8mm; The fin height h is 57-60mm; The groove width s is 12-15mm; The fin bottom thickness t1 is 2.6-2.9mm; The thickness of t2 on the top of the fin is 1.6-1.9mm. The computer simulation and experimental test show that the radiator with this structure and size can greatly improve the heat dissipation performance, significantly reduce the junction temperature of LED lamps, and improve the service life of LED lamps.If you need any high power 100w heat sink aluminum led extrusion,pls contact us.Here we would reply you immediately.To design the most competitive aluminum led extrusion to you.