flowmeter calibration device

Whole SS304 Material Anti-corrosion Electromagnetic Flowmeter

Technical parameter of Whole SS304 Material Anti-corrosion Electromagnetic Flowmeter :

Lining and nominal diameter DN(mm) : (special specifications can be customized) for Electromagnetic Flowmeter

Four fluorine lining: 10.15.20.25.32.40.50.65.80.100.125.150.200.250.300.350.400.450.500.600

Rubber lining: 80.100.125.150.200.250.300350.400.450.500.600.800.1000.1200.1400.1600

Measurement error: ± 0.5%

Temperature of measured medium: rubber lining -20℃~ + 80℃, PTFE -20℃ ~ + 180℃

Ambient temperature: -25~ + 60 ℃

Relative humidity: 5%~95%

Rated pressure : DN10~65: 4.0MPa;  DN80-150:1.6MPa;  DN200-600:1.0MPa

Flow rate range:0.1~15m/s

Conductivity: The conductivity of the measured fluid is not less than 5μs /cm

Output signal and load resistance :0~10mA, 0~1000 Ω;  4~20mA, 0~500 Ω

Electrode material: 316L, Ti, Ta, HB, Pt

Protection level: Standard IP65, IP67, and optional IP68

Straight pipe length: upstream ≥ 5DN, downstream ≥ 2DN

Connection: flange connection, thread connection, clamp connection

Power supply: 90~260AC ± 10%,50Hz ± 5%

Power consumption: ˂ 20W