DN80 stainless steel 304 flowmeter

This is a  flowmeter made of all SS304 materials and has a strong explosion-proof and corrosion-resistant function electromagnetic flowmeter.

Technical parameter

Lining and nominal diameter DN(mm) : (special specifications can be customized)

PTFE lining: 10,15,20,25,32,40,50,65,80,100,125,150,200,250,300,350,400,450,500,600

Rubber lining: 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 800, 1000, 1200, 1400, 160

Measurement error: ± 0.5%

Temperature of measured medium: rubber lining -20℃~ + 80℃, PTFE -20℃ ~ + 180℃

Ambient temperature: -25~ + 60 ℃

Relative humidity: 5%~95%

Rated pressure : DN10~65: 4.0MPa; DN80-150: 1.6MPa ; DN200-600:1.0MPa

Flow rate range: 0.1~15m/s

Conductivity: The conductivity of the measured fluid is not less than 5μs /cm

Output signal and load resistance :0~10mA, 0~1000 Ω;  4~20mA, 0~500 Ω

Electrode material: 316L, Ti, Ta, HB, Pt

Protection level: Standard IP65, IP67, and optional IP68

Straight pipe length: upstream ≥ 5DN, downstream ≥ 2DN

Connection: flange connection, thread connection, clamp connection

Power supply: 90~260AC ± 10%,50Hz ± 5%

Power consumption: ˂ 20W