DN1100 Remote type

CXLDS electromagnetic water meter is cosists of two parts: sensor and converter. It is an instrument made according to Faraday's law of electromagnetic induction to measure the volume flow of conducting liquid in a closed pipe.

Electromagnetic water meters are widely used in chemical industry, electric power, water supply and drainage, paper making, pharmaceuticals, food, environmental protection and other departments.

1.2 Product Features

a) The measurement is unaffected by changes in fluid density, viscosity, temperature, pressure and conductivity;

b) There are no obstructing flow parts in the measuring tube and no pressure loss;

c) The sensor test signal is directly proportional to the flow rate, and the measurement range is wide;

d) Adopt low frequency square wave excitation, low power consumption, stable zero.

1.3 Working Environment

a) Ambient temperature: -25℃ ~ 55℃;

b) Ambient humidity: ≤95%RH;

c) Water temperature: 0.1℃ ~ 50℃;

d) Water pressure: 0.03Mpa ~ 1Mpa.

2 Main specifications and technical parameters

2.1 Implementation Standards

Product performance in accordance with GB 778.1-2007-T closed full pipe in water flow measurement applications.

2.2 Key Components

The key part (component) of the electromagnetic water meter: conduit, electrode, converter, any key component plays a vital role in the overall performance of the electromagnetic water meter.

Battery power supply: 3.1V ~ 3.6V;

Dielectric conductivity: clean water > 20us/cm.

Nominal caliber: DN32, DN40, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300.

Note: The flange is manufactured according to GB/T9119-2010.

Medium temperature: 0.1℃ ~ 50℃

Ambient temperature: (-20 ~ +60) ℃

Power: less than 1W

Accuracy level: 2

Protection level: IP68

Climatic and mechanical environmental conditions Class C

Electromagnetic environment condition level: E2

Battery life: Not less than 4 years

Display: Total display up to 9 digits in decimal notation, showing forward accumulative flow, reverse cumulative flow, and net cumulative flow respectively.

Alarm information: empty pipe alarm, abnormal excitation current  alarm.