Nylatron GS PA66+MOS2
2 year ago
Nylatron® GS polyamide PA66 is a molybdenum disulfide (MoS₂)-filled nylon that offers excellent strength and stiffness, as well as a low linear coefficient of thermal expansion compared to other nylon products. As a result of these properties, Nylatron® GS PA66 components maintain their fit and clearance and reduce the likelihood of bearing seizure. For these reasons, this grade is commonly used in bushings, bearings, rollers, pulleys, sheaves, wear pads, valve seats and seals throughout the construction and heavy equipment industries.
Nylatron® GS PA66 AE is a molybdenum disulfide (MoS2)-filled nylon that offers excellent strength and stiffness and a low linear coefficient of thermal expansion compared to other nylon products. Nylatron® GS PA66 AE maintains its fit and clearance even after prolonged exposure to high temperatures and reduces the likelihood of bearing seizure. For these reasons, this grade can be used as bushings, bearings, rollers, pulleys, sheaves, wear pads, valve seats and seals throughout the aerospace industry as well as in construction and heavy equipment.
Material Properties
Filled with MoS₂
Excellent mechanical strength and stiffness
Lower coefficient of thermal expansion than other nylons
Maintains fit and clearance
Reduced probability of bearing seizure
Available Geometries
Nylatron® GS PA66 profiles are available in a range of standard sizes in the following geometries: bar, plate, tube
Available Colors
Nylatron® GS PA66 profiles are available in the following colors: Dark Gray
Applications
Bushings & Bearings
Conveyor Wear Components
Gears
Metal Replacement Applications
Pulleys
Roller Wheels
Sheaves
Wear Pads
Bearing & Wear Parts for a Wide Range Automated Equipment
Valve Seats & Seals
Typical Properties of Nylatron ® GS Moly-Filled Type 6/6 Nylon
| DETAIL | |
Description |
Value |
Material Type |
Semi-Crystalline Thermoplastic |
Chemical Name |
PA Polyamide Type 6/6 |
Trade Name |
NYLATRON GS |
Additives |
MoS2 Filled |
Color |
Black |
Manufacturer |
Mitsubishi Chemical Advanced Materials |
| PHYSICAL | |||
Property |
Test |
Unit of Measure |
Value |
Density |
ASTM D792 |
g/cm3 |
1.16 |
|
|
ASTM D792 |
lb/in3 |
0.042 |
Water Absorption, 24 hrs, Immersion |
ASTM D570 |
% by wt. |
0.3 |
| MECHANICAL | |||
Property |
Test |
Unit of Measure |
Value |
Tensile Strength |
ASTM D638 |
psi |
12500 |
Tensile Modulus |
ASTM D638 |
psi |
480000 |
Tensile Elongation at Break |
ASTM D638 |
% |
25 |
Flexural Strength |
ASTM D790 |
psi |
17000 |
Flexural Modulus |
ASTM D790 |
psi |
460000 |
Compressive Strength |
ASTM D695 |
psi |
16000 |
Compressive Modulus |
ASTM D695 |
psi |
420000 |
Hardness |
ASTM D785 |
Rockwell R |
Rockwell R115 |
IZOD Impact-Notched |
ASTM D256 |
ft-lb/in |
0.5 |
Dynamic Coefficient of Friction |
QTM 55007 |
NA |
0.2 |
Wear K Factor |
QTM 55010 |
in-min/ft-lbs-hr |
90 |
Limiting PV |
QTM 55007 |
psi-fpm |
3000 |
| THERMAL | |||
Property |
Test |
Unit of Measure |
Value |
Coefficient of Linear Thermal Expansion |
ASTM D696 |
x 10-5 in./in./掳F |
4 |
Heat Deflection Temp |
ASTM D648 |
℃ at 264 psi |
93 |
|
|
ASTM D648 |
℉ at 264 psi |
200 |
Melting Point Temp |
ASTM D3418 |
℃ |
260 |
|
|
ASTM D3418 |
℉ |
500 |
Max Continuous Operating Temp |
℃ |
104 |
|
|
|
|
℉ |
220 |
Minimum Operating Temp |
℃ |
-30 | |
|
|
℉ |
-22 | |
Thermal Conductivity |
ASTM C117 |
BTU-in/ft-hr-℉ |
1.7 |
|
|
ASTM C117 |
x 10^4 cal/cm-sec-℃ |
5.9 |
Flammability Rating |
UL94 |
NA |
HB |
| ELECTRICAL | |||
Property |
Test |
Unit of Measure |
Value |
Dielectric Strength |
ASTM D149 |
V/mil |
350 |
Surface Resistivity |
ASTM D257 |
ohm/square |
> 10^13 |
| COMPLIANCE | |
Description |
Value |
FDA |
No |
USDA |
No |
NSF |
No |
3-A Dairy |
No |
Canadian Food Inspection Agency |
No |
USP Class VI |
No |
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Hony Engineering Plastics Limited
- *Message:
-
Submit
Main Product:
Plastics Sheet ,
Plastics Rod,
CNC Plastic Machined Parts,
CNC Metal Machined Parts,
Plastics Injection Molding,
Antistatic Material
You May Also Like