EPE Foam1 hot melt

EPE Foam hot melt adhesive

Pearl cotton special hot melt adhesive: Hot melt adhesive for EPE foam bonding, this product has environmental protection, non-toxic, high viscosity, fast curing, easy to operate, continuous use without carbonization and will not turn yellow and other characteristics.

Recommended temperature: 160-- 180℃

Operation method
Please pre-heat binding agent device before use, preheat time is generally about 2 hours is appropriate.
The amount of glue in the preheated glue pot should be mastered properly, and the colloid will be melted after adding too much, which will make its deterioration and aging, reduce viscosity and affect adhesion.
The bonding and shaping work must be completed within the opening time of the glue, and the clamped adhesive is cooled to room temperature.
Do not touch the glue system with your hands because the temperature is too high. Wear safety protective equipment to prevent burns.