16x25 Ferrite Magnet Moulded

Replacing the impeller in an aquarium canister filter is a straightforward process. Here's a general guide on how to replace the impeller:

1. **Prepare**: Gather the necessary tools and replacement impeller. Make sure you have a clean workspace.

2. **Turn off the filter**: Unplug the filter from the power source and disconnect it from the aquarium.

3. **Remove the filter**: Take out the canister filter from its housing or bracket. Place it on a stable surface.

4. **Access the impeller**: Depending on the design of your filter, you may need to remove a cover or access panel to reach the impeller chamber.

5. **Remove the old impeller**: Carefully pull out the impeller assembly from the chamber. The impeller is typically attached to a shaft, which may slide out easily or require some gentle pulling.

6. **Inspect for damage**: Take a close look at the impeller and the shaft. Check for any signs of damage, wear, or debris buildup. Clean the impeller chamber if necessary.

7. **Install the new impeller**: Slide the new impeller onto the shaft in the correct orientation. Ensure it fits snugly but can still rotate freely. If the impeller assembly includes a shaft, insert it back into the chamber.

8. **Reassemble the filter**: Put the impeller chamber cover or access panel back in place. Ensure it is securely fastened to prevent leaks.

9. **Reinstall the filter**: Place the canister filter back into its housing or bracket. Ensure all connections are secure.

10. **Reconnect and test**: Plug the filter back into the power source and reconnect it to the aquarium. Turn on the filter and observe the impeller operation. Ensure it rotates smoothly and silently.

11. **Monitor**: Keep an eye on the filter for the next few days to ensure the impeller is functioning correctly and there are no leaks.

It's essential to use the correct replacement impeller specified by the manufacturer for your canister filter model. If you're unsure about the replacement process or encounter any difficulties, consult the manufacturer's instructions or seek assistance from a professional or knowledgeable aquarium specialist.

We are the manufacturer of submersible pump magnet / impeller assembly magnet rotor and other permanent ferrite magnet,please chat us if you are interested in any of our ferrite magnet.