Wet wire drawing machinery

Performance parameters for wet wire drawing machine

(1) Input range: Ø 2.2-2.0mm

(2) Output range: Ø 1.0/0.8/0.6/0.5mm

(3) Design speed: maximum 150 meters/minute

(4) Maximum usable eye module: 18 (to be provided by the buyer)

(5) Eye mold outer center size: Ø 30mm x 15mm

(6) Mechanical reduction rate: 1.159, finished product 1.1

(7) Main motor: 30kW

(8) Coiling motor: 4Kw

(9) Coiling outer diameter: 400 I-shaped wheels

(10) Brake braking: pneumatic brake

2、 Construction and function of the machine:

1. Host construction:

(1) Material: Q235 (high-quality steel plate welding)

(2) Processing: The machine body is formed by high current welding, annealed to eliminate internal stress, and then completed by precision boring machine with integrated reaming, which has the characteristics of no deformation and high precision.

2. Drive shaft:

(1) Material: High wear-resistant mold steel (quenched and tempered)

(2) Processing: The shaft core is subjected to quenching and tempering treatment to eliminate internal stress and achieve good comprehensive mechanical properties. The mating parts are finely ground to ensure the coaxiality and flatness of the shaft core.

3. Power transmission:

Using synchronous belts to drive the rotational speed between each extension wheel axle one by one. The winding shaft is driven by another motor separately, matched with an independent frequency converter, and feedback information is provided to the frequency converter by the tension rod buffer device, achieving continuous adjustment of the winding speed.

We can make wire drawing machine including pay off machine,take up machine,layer winding machine,drum packing machine,and flux cored welding wire forming machine. 

Butt welding machine,pointing machine and so on.