Two-component Epoxy adhesive

8 month ago

2 0 

9 month

Product details

Product introduction

LINGWO AC-1916 Acrylic structural adhesive is a two-components, low odour, no pungent odor of traditional acrylic adhesives during using.medium viscosity, the operation time is 5-8 minutes, the two components are mixed in a volume ratio of 1:1,15 minutes of bonding and positioning, 1 hour to reach the applicable strength; after full curing, a tough coating is formed, which has good adhesion to most materials, is impact-resistant, aging-resistant, low-emission, environmentally friendly, and complies with EU ROHS regulations.

Other attributes

Place of origin	Dongguan China
Main raw material	Acrylic based adhesive
State	liquid
Brand Name	LINGWO
Model Number	AC-1916
Application	Metal/glass/ceramics/Structural bonding of electronic devices
Appearance	A：Light yellow viscous creamy B：Yellow viscous creamy
Viscosity ( 25℃,CPs )	A：40-60 B：40-60
Gravity（25℃, g / cm³）	A：0.96 B：0.96
Mixing rate	1:1
Opening time (Minute)	13 Mins
Initial curing time (Minute)	30 Mins
Fully curing time (Hour)	24H
Packaging specification	50ml/piece
Storage condition	12-24℃
Shelf life	12Months

Typically application

Two-component acrylic adhesive is suitable for bonding rigid materials such as metal, glass, ceramics, etc. It is also suitable for self-adhesion and mutual adhesion of most hard plastics, rubber and resin-based composite materials; it is suitable for bonding electroacoustic, audio-visual equipment, home appliances, decorative materials, etc.

Direction for use

1. Clean the two surfaces to be bonded, remove oil, rust and floating dust, and dry them.

2. The line speed and glue output should ensure gap filling; bonding and positioning must be completed within the applicable time; maintain appropriate pressing and clamping time until the bonding is reliable.

3. Wipe off the overflowed glue with a non-woven cloth dipped in a small amount of solvent.

4. If faster bonding and positioning are required, the bonded parts can be hot pressed after applying the glue. Please set the hot pressing temperature and time according to the substrate material.

You May Also Like

1173

Office

985

Air purifier 1.mp4

962

kitchen mat anti fatigue.mp4

825

rubber foam insulation tube.mp4

803

Alumina Metalized Ceramics

767

cotton pads2

709

Car MP5 player

699

Nail Polish 1

670

Packing and shipping.mp4

1511

15tonSZS*2

Bossgoovideo.com Contact Now

If you are interested in the product, contact Bossgoovideo.com for more information

*To:: Dongguan Shuangzhan Industrial Co.,Ltd

*Message:

Submit

 Disclaimer :

The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Suppliers

Dongguan Shuangzhan Industrial Co.,Ltd

Audited supplier

9 month

Main Product: INSTANT GLUE, UV GLUE, EPOXY RESIN AB GLUE, ACRYLIC STRUCTURAL AB ADHESIVE, SILICONE GLUE, HOT GLUE

Contact now