Inflatable flood tube

This Air filled flood tube has these features:

1. Material feature: Composite PVC mesh cloth, surface anti - uv with reflective marking.

High temperature resistance, low temperature resistance, antistatic, waterproof, anti-oil, the whole thermal bonding molding.

2. Tear strength（N）：Warp 280/weft 320/N；

3. Tension strengtht :（N/5CM）：wrap 2800/weft 2500/N

4. Usage temperature（℃）:-30/70℃;

5. Fire resistance: EN13501 B1

It can be used to quickly set up Anti-Flood Wall, used as Flood Barrier.

How to inflate the inflated flood tube?

The inflation method of flood control walls mainly involves using air compressors or manual inflators to inflate airbags. The specific steps are as follows:

Use an air compressor or manual inflator: This is the basic tool for inflating, choose the appropriate tool according to the size of the airbag and inflation requirements.

Find the air valve: Find the inflation port on the airbag, usually an air valve, and inflate the airbag through this air valve.

Inflate: Connect the air outlet of the air compressor or manual pump to the air valve and start inflating. When inflating, be careful not to overfill to avoid affecting the effectiveness and lifespan of the airbag.

Inspection: After inflating, ensure that the airbag is not leaking, and then cover the cover of the air valve to maintain the air pressure inside the airbag.

It should be noted that the specific inflation method and steps may vary depending on factors such as the model, specifications, and usage environment of the airbag. Therefore, before actual operation, it is necessary to carefully read the instructions for using the airbag to ensure the correct and safe completion of the inflation process.