wet type wire drawbench

wet drawing machine: 1. Structural characteristics (1) Power control: The main motor is controlled by a frequency converter for stepless speed regulation, which can be adjusted arbitrarily. The computer LCD panel displays the current main engine extension speed. The winding motor is equipped with a separate frequency converter, which drives precision resistance through the rotation of the tension rod. The signal of resistance value change is automatically calculated under the control of the PC board. The command is given to the winding frequency converter to immediately adjust the motor speed to keep the tension rod stable and adjust the optimal tension to maintain even winding tension. (2) Extension method: Horizontal four axis, staggered front and rear tower wheels. (3) Transmission mode: All machines are driven by synchronous belts. (4) Automatic shutdown: automatically stop at the meter, and protect the brake when the exit mold is broken. (5) Using special high-quality products: The surface of the A wire drawing machine is sprayed with paint for beautification treatment. B bearings are all made of high-precision bearings. C-factory brand high-efficiency transmission synchronous belt with permanent anti-static design. High quality series motors from domestic first tier manufacturers. 2. Performance parameters (1) Input range: Ø 2.2-2.0mm (2) Output range: Ø 1.0/0.8/0.6/0.5mm (3) Design speed: maximum 150 meters/min