Inline Filter SDRFLD BNHC 1320 CAM 20 D 1.X-L24

1. Filter Housing

Construction

The filter housings are designed in accordance with international regulations.  The two sections of the filter housing (each with bolt-on cover plates) are connected by means of a ball change-over valve with negative overlap and single lever operation (ball, segment).

2. Filter Element

2.1 Filter elements are validated with all ISO standards:

ISO 2941, ISO 2942, ISO 2943, ISO 3724, ISO 3968, ISO 11170, ISO 16889

2.2 The max allowable pressure drop:

Glass Fiber (BN/HC): 20 bar

Paper (P/HC): 10 bar

Wire mesh (W/HC): 20 bar

Stainless steel fiber (V): 210 bar

2.3 Filtration rating in μm:

BN/HC, V: 3, 5, 10, 20

P/HC:10,20

W/HC: 25, 50, 100, 200

3.General

Mounting: Filters must be flexibly mounted and not fixed rigidly to the floor or used as a pipe support.

Flow: Inlet: top Outlet: bottom

Temperature range: -10℃ to +100 ℃

Setting pressure of clogging indicators: ΔPa=2bar-0.2 bar

Seals: NBR

Standard filter elements are with bypass valve.

4.Compatibility With Hydraulic Fluids ISO 2943

Hydraulic oils H to HLPD DIN 51524

Lubrication oils DIN 51517, API, ACEA, DIN 51515, ISO 6743

Compressor oils DIN 51506

Biodegradable operating fluids VDMA 24568 HETG, HEES, HEPG

Fire-resistant fluids HFA, HFB, HFC and HFD

Operating fluids with high water content (>50% water content) and CLP oils on request

5. Advantages and Benefits

Composite structure, high filtration accuracy

Large dirt holding capacity long service life

High corrosion resistance and pressure resistance

Increased flow rate per unit area

High strength, easy to clean 

6. Certificates