3D Printing Pen for Kids

8 month ago

3 0 

10 month

Product details

A low temperature 3D pen is a type of 3D printing tool that melts plastic filament at a lower temperature compared to traditional 3D printers. This makes it safer and easier to use, particularly for beginners or children, as the melted plastic doesn't get extremely hot.

These pens work by heating up a small amount of plastic, which is then extruded through a nozzle where it can be shaped and formed into 3D objects with your hands in the air. The heat is usually regulated by a thermostat inside the pen, allowing you to control the temperature to ensure the right melting point for the specific plastic filament being used.

This kids 3D pen use 3D printer filament pcl filament not PLA filament or ABS filament.

Operation

1.Built-in rechargeable lithium-ion polymer battery, battery ife is more than 1 hourYou can also use mobile power or computerUSB output driver

2.switch power/speed button to 1 or 2position the indicator will flash,and heating will be started automatically

3.When the indicator stops flashing, press loading buttonto start feeding, load filament into the filament hole till it comes outfrom the nozzle.Press it again to stop

4.click the unloading/temperature button once to remove filamentautomatically,after 10seconds,removing will be stopped,or click the button again to stop it.

5.Switch the power/speed button to 0 position to power offthe pen,filament will be removed automatically after powered off.Note: after 5minutes without operation, it will be powered off automatically

6.When the indicator flashs fast, recharge it(Use the UsB cable with any AC/DC adapter with an output of 5V,1A orabove,or computer USB port).

Key features

1、low temperature, safe for kids.

2、with battery 550mAh, could use half hour after full charging.

3、integrated nozzle without clog problem

Parameter

1. Power input：5V,1A

2. Max heating power: 5W

3. Feeding material：1.75mm PCL

4. Extruding temperature: 90℃/100 ℃

5. Temperature adjust：2 levels

6. Speed adajust：2 levels

7. Screen：No

8. Housing material：Plastic

9. Battery Capacity：3.7V, 550 mAh

10. Nozzel diameter：0.9mm

11. Color：blue, white, orange, green

You May Also Like

430

A4-2 video

411

A3-4

395

AP1-P Ball Pump.mp4

379

A4-1 black video

367

INJECTION VIDEO.mp4

365

21-011-4 整体

365

JSKPAD A4-3

323

NEWO Balloon Pump v1.mp4

318

Silicone Beads Baby Teether video.mp4

315

Silicone Wooden Baby Teether video.mp4

Bossgoovideo.com Contact Now

If you are interested in the product, contact Bossgoovideo.com for more information

*To:: Shenzhen Xinzerong Technology Co., Ltd

*Message:

Submit

 Disclaimer :

The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Suppliers

Shenzhen Xinzerong Technology Co., Ltd

Audited supplier

10 month

Main Product: 3D Printer Filament , 3D Printing Pen, PLA Filament, TPU Filament, PETG Filament, ABS Filament

Contact now