Automatic production of copper foil

Evaporator Brazed Plate Heat Exchanger for Extreme High-pressure Condenser

Advantages of brazed plate heat exchanger
This heat exchanger is very compact in structure and light in texture, so it is easier to install. At the same time, it is also very durable and can be used in high temperature or high pressure environments. In addition, its dirt coefficient is very low, no need to frequent cleaning, water consumption is not much, is an energy-saving product. 

Defects of brazed plate heat exchanger
The sealing of the brazed plate heat exchanger is not very good, and it is easy to leak during use, and the gasket inside needs to be replaced frequently. There are also certain limitations in the pressure bearing, which need to be controlled below 1MPa. At the same time, there will be blockage after a long time of use, so it cannot be used on fluids containing suspended matter.
Measures for heat exchanger fouling
When the heat exchanger is used, the water quality can not be directly injected into the use of it during its operation, and it must be strictly tested for the water in the system and the softened water in the softening tank first, and then injected into the pipe network after it is qualified.
Jiangsu Baode provides various plate heat exchangers, including brazed plate heat exchanger, gasket plate heat exchanger, shell and plate heat exchanger.