Pallet Stretch Wrapper

Automatic pallet wrapping system with rotating turntable and pallet conveyors 

Basic requirement:

Pallet dimension: L1200mm * W1200mm * H2000mm

Weight: max.1000kgs

Volt: 380volt, 50Hz & 3 phase

Supply scope:

1. Mast                                                   1set

Height: to be designed according to the packing height 2,000mm and the turntable height 550mm.

Carriage lift motor: SEW brand.

2. Film carriage                                             1set

Film carriage on the front of the tower

Stretch film: Film thickness: 25μm; Film width: 500mm; Inner diameter: 76mm; Outer diameter: 240mm;

Max. Weight: 13.8kgs;

Open-door pre-stretch standard film carriage. Powered pre-stretch film carriage 250% (1:3.5);

Motor: SEW brand; Motor power: 0.37kw

Film carriage lifting driving: chain driving, good stability and high reliability

3. Turntable                                                1set

Diameter: 1800mm; turntable height: 550mm.

3 strand chain conveyor, with powder coated steel to cover between chains;

Turntable speed max. 15rpm;

Slew bearing driven;

Motors: SEW brand, turntable motor should be covered with steel board.

4. Film delivery device                                        1set

After finishing stretch wrapping, the film will be cut and clamped automatically.

Air blowing to wrap film head into pallet.

Hot melt cutting wire to cut the film, and then wipe the film tail.

Pneumatic component: FESTO brand

5 Control system                                       1set

Table type control cabinet

4-8 program can be set separatedly for different product

Proximity switch on the film carriage should be mounted with M12 thread.

Electrical brands: