Shot blasting machine video

H-beam Shot Blasting And Cleaning Machine

H-beam Shot Blasting And Cleaning Machine Function Introduction:

  Shot-blasting machine is a kind of shot-blasting equipment, which is applied to clean the surface of steel structure welded H beam, H-style steel, plate and other profiles. It can clean away rusty spot, rusty scale, welding slag on the H section steel surface, as well as welding stress, in order to remove stress and improve surface lacquer quality and rot proofness of steel structure and steel.

H-beam Shot Blasting And Cleaning Machine Main Performance Features:

Compared with other machines made in home factories, this machine has some advantages as following:

●  The quantity of shot-blasting and arrangement mode both are calculated by computer mass ejection simulation. The 8 impellers are located at upper and lower, right side and left side, ensuring that the bunch of projectiles ejected by shot-blasting cover the most part of the steel surface, including the end parts. It makes sure that the effect of shot-blasting is overall and effective.

●  The system is a centrifugal peering shot-blasting, which is adopted in advantages of massive shot-blasting and high ejection speed. Both the quantity and the momentum of the projectiles ejected to the H beam surface are highly improved in unit time. So it can shorten the shot-blasting time, and improves the efficiency, comes to a pleasing cleaning quality.

●  Dedusting system adopts filtration type of back flushing. Dust collector adopts folded dust filter cylinder, and the dusting area has increased. The filter cylinder adopts nano-meter fiber technology; dust collection efficiency is more than 99.99%, especially for dust particles with a diameter of 0.5μm. After efficient filtration, the air is clean and can be recycle used or indoor emission. The pulse controller can adjust the frequency, speed and intensity of ash removal, compared with domestic traditional bag type single grade dusting system, it has advantages of high dust efficiency, lower operation resistance, small volume, light weight, easy replacement and so on. Emission quantity meets the national emission standard.

●  Shot sand separation system adopts advanced full curtain type, it’s invented by company after a long time research. It’s especially for steel structure shot separation cleaning after blasting. The performance i achieves home and abroad similar product level. The separation combines both wind selection and screening together, separates dust, metal oxide scale fragments, broken sand, large particles from qualified projectile, and obtains clean steel shot.

●  Spring steel plates and resistance rubber complex figure type baffles are installed in the two ends of shot-blasting chamber, in order to prevent projectiles splashing. At same time, it decreases the area of chamber in and out ports, so enhances the effect of dust.

●  Projectile clean-away device is installed in every out port of chamber, it can blow away remained projectile on H beam, reduce the wastage of projectile, lower the leakage of projectile. To the complicated structure H beam, operator can clean projectile at outside. Dust is absorbed by dusting system. This system adopts self-circulation type to clean the surface.

●  Adopting the international advanced technology projectile controller. Not only can control projectile self-support. But also can through the control valves’work schedule regulate projectile’s flow rate. So as to realize it supply controllable and adjustable. It can guarantee no leakage projectile and jam phenomenon .Diversion safe and reliable.

H-beam Shot Blasting And Cleaning Machine Technical Parameter:

H-beam Shot Blasting And Cleaning Machine Goods Supply Range:

Cleaning room assembly: main cleaning room, sub cleaning room, rubber curtain, guards plate for shot-blasting room, impeller head;

Roller converter: outdoor roller conveyor, indoor roller conveyor, chain, chain wheel;

Screw conveying system: longitudinal screw conveying system, feed screw conveying system, hoister, and separator, shot supply valve;

Dust palletizing system: dust pipe, duster, fan, wind pipe, chimney and reverse blowing clean device;

Electric controlling assembly: electric controlling box.

H-beam Shot Blasting And Cleaning Machine Layout drawing:

We use high efficient impeller head with low noise for shot blasting machine:

Steel shots can be blasted onto workpiece surface from different directions:

Why choose us--- China Zhouxiang Complete Set of Welding Equipment Co.,Ltd ?

As the largest H-beam manufacturing equipment manufacturer in China, we have strong design and manufacturing capabilities, with an annual production capacity of US$40 million.

How to produce qualified H-beam? It is an important category of our continuous research for 30 years. Our main products are: CNC Control Flame/Plasma cutting machine、H beam assembling machine、H beam welding machine、H beam straightening machine、H beam shot blasting machine、H beam assembly-welding-straightening multi-functions machine、H beam horizontal productions line、automation welding machine etc.